WhatsApp: +86 19166273143 | emma.tan@tkbkl.com

About molding part for sweeper

To create a customized wholesale molding part for a sweeper, you will need to follow these steps:

Determine the specifications of the molding part: Start by identifying the specific molding part that you need for your sweeper. Determine its size, shape, and material requirements, and any other details that are necessary for the part to function properly.

Design the part: Once you have the specifications for the molding part, you will need to create a design for it. This can be done using CAD (Computer-Aided Design) software or by working with a skilled designer who can create a 3D model of the part.

Select a manufacturer: Once you have a design for the part, you will need to find a manufacturer who can create it for you. Look for a manufacturer who has experience working with the type of material you need for your part, and who can create high-quality, precise parts.

Get a quote: Contact the manufacturer and provide them with the design for the part, along with any other relevant details. They should be able to provide you with a quote for the cost of manufacturing the part.

Order the parts: If you are satisfied with the quote and the manufacturer’s capabilities, you can place an order for the parts. Be sure to specify the quantity of parts you need, as well as any other details that are important to ensure that the parts are made exactly as you need them.

Quality control: Once the parts have been manufactured, it’s important to perform quality control checks to ensure that they meet your specifications. This can include inspecting the parts for defects or measuring them to make sure they meet the required dimensions.

By following these steps, you can create a customized wholesale molding part for your sweeper that meets your specific needs and is made to high-quality standards.

molding part for sweeper LATEST PRODUCTS

Main Quality Control Procedures

TKB has independent quality control department to control every quality inspection step from incoming material, production process, assembly, packing, as well as cargo shipment. We have established quality evaluation program for each process to assure best quality and most professional service to our customers.
We carry out full inspection reports like monthly/seasonal/yearly quality analysis report, CPK, FAI, IQ, OQ, PC, PPAP, PFMEA etc.
1.DFM quality control
2.Mold flow quality control
3.Mold steel hardness check
4.Electrodes Inspection
5.Core and Cavity Inspection
6.Pre-assembly Inspection
7.Trial Report and Sample inspection
8.Production process quality control
9.OQC inspection

Supply Chain Support

Extended quality insurance from worldwide branded suppliers to insure good quality and after-sales service to your molds and molded parts.
Mold Steel suppliers: Assab, Bohler,Buderus,Daido,Finkl,Groeditz, Hitach, LKM Steel, Saartahl, Schmolz+bickenbach
Mold Base: LKM, Mingli
Hot Runner: DME, Incoe, Inglass, Mold Masters, Yudo, Hasco, Syventive, Husky
Hydro-Cylinder: Parker, HPS, Merkle
Plastic Materials: Dupont, Chimei, LG, Basf, Bayer, DSM,Borealis,Formosa.
Texture: Mold Tech Yicksang

we'll ensure you always get
best results

FAQ

Date:2021-8-10

FAQ/ Frequently Asked Questions

 

 

As a plastic mold and injection molding company in China, we prepared answers for following most frequent asked queries for you, for more queries are always be here for you.

CONTACT US

CONTACT US

 

1. What info needed to get a correct mold quotation? How fast does it take to quote a project?

1)2D or 3D product drawing is needed for a mold quote;

2) If special requirement on mold steel, mold life, cavity quantity, hot runner requirement, part material, forecasted year quantity. Complete information will help to a most suitable cost effective, value added mold solution.

3) Normally take 2 working days to quote a new mold project seriously, and expedite quote is also available.

 

 

2. What’s the payment condition in TKB Mold?

1) New customer for mold: T/T 50% deposit, 50% against sample approval.

2) Mold modification: 100% upon sample approval.

3) Injection molding parts: 50% deposit, 50% before shipment.

4) VIP customer special terms: to be negotiated.

 

 

3. What’s the price terms/freight TKB mold will offer?

  • Normally TKB will offer ex-work TKB price for injection mold and plastic parts.
  • Free mold trial shotting samples free of charge and with freight to collect.
  • VIP customer special terms: to be negotiated.

 

 

4. What’s lead-time for a plastic mold and injection molding processes?

  • Injection mold lead-time counted from mold drawing approval and receipt of deposit to first mold trial(T1), and the difficulty of the molds determines how much time is needed, normally 20 to 60 days.
  • Injection molding lead-time counted from sample approval and receipt of deposit to production finish, order quantity determines how much time is needed, normally 7 to 15 days.

 

 

5. Will TKB send DMF to customer?

Yes,TKB Mold will send DFM (design for manufacturing) analysis and even mold flow analysis prior to the start of mold construction for customer review/approval.

 

 

6. Will TKB send mold design for approval?

After DMF approval, TKB will send the mould design for approval, and TKB will not start steel-cut before getting customers written approval of mold design.

 

 

7. How many plastic samples will be free provided?

TKB normally would provide 10~20 shots first mold trial shooting samples with gate(if have) free of charge according to the size of the parts, it would be freight to collect.

 

 

8. Which side provides plastic resin for injection mold trial?

TKB can provided plastic resin, if needed customer can provide the plastic resin the same.

 

 

9. How to make sure of quality before shipment?

shipment can be arranged only after TKB QC inspection PASS, or customer QC inspection PASS, or third-party inspection PASS if required. And TKB will always be there to provide full support.

 

 

10. How will TKB keep record of all mold data.

TKB will keep record of all final approved 2D, 3D mold drawing, modifications document, and send to customer for file to avoid future confusion in case engineering change is needed.

molding part for sweeperlatest blogs
view more
wholesale large plastic molds

By Emma 2022-10-25

Large Size Molded Part Short Description: TKB specialize in injection molding service for large size molded part. TKB is certified with ISO9001:2015.We are strictly follow the correct procedure to ens...
injection molding machine mold

By Emma 2022-9-2

Injection molding machines use molds to inject molten plastic into a mold cavity. The plastic is then cooled and solidified to create the desired shape. Injection molding machine molds are an importan...
top injection molding companies

By Emma 2022-11-25

When choosing plastic injection mold manufacturer, you’ll want to keep several factors in mind: cost effectiveness, scalability, environmental impact and liability. Here are four considerations to mak...
automotive injection molding companies

By Emma 2022-11-25

What Products Are Made with Injection Molding? Plastics are ubiquitous, and manufacturers employ different methods when making plastic products. One of the most popular among these methods is injectio...
injection molding mold cost

By Emma 2022-10-14

Injection molding is a common manufacturing process for a variety of products. The process involves injecting molten plastic into a mold to create a desired shape. In order to produce high-quality pro...
rapid injection molding

By Emma 2022-8-8

Rapid injection molding is the process of making injection molds for prototypes, bridges, and short production run parts in less time and at a lower cost than full production molds. Injection molds, t...
Automotive mold made in China

By Emma 2023-2-23

Automotive molds are often made in China due to the country's large manufacturing industry and lower labor costs. China has a well-established mold making industry and is known for producing high-qual...
injection molds price

By Emma 2022-6-16

What Is Injection Molding? Injection molding is one of the primary methods of creating plastic goods. Not just any plastic goods – the process mostly entails the production of mass-produced parts of i...
How Chinese Mold Manufacturers are Innovating for Improved Quality

By Emma 2023-2-27

China is home to a vast and rapidly growing mold manufacturing industry, and many Chinese mold manufacturers are making significant investments in innovation and technology to improve the quality of t...
plastic injection mould maker

By Emma 2022-6-25

Injection molding is a method of injecting heated and molten plastic material into a mold, and then cooling and solidifying to obtain a molded product. This method is suitable for mass production of p...
Contact