WhatsApp: +86 19166273143 | emma.tan@tkbkl.com

About plastic mold factory

When it comes to finding the right plastic mold factory, there are a few things you need to keep in mind. The first is that not all factories are created equal – some are better than others at certain things. So, it’s important to do your research and find a factory that has a good reputation for producing high-quality molds.

When looking for a plastic mold factory, there are a few things you need to keep in mind. The first is the quality of the molds they produce. You want to be sure that the molds are made with high-quality materials and are properly machined. This will ensure that your parts are properly molded and will last long-term.

Another thing to look for is the factory’s experience. You want to be sure that the factory has a lot of experience manufacturing plastic molds, as this will ensure that they have the knowledge and expertise to produce quality molds.

When looking for a plastic mold factory, be sure to do your research and find one that produces high-quality molds. This will ensure you get the best product for your business.

Main Quality Control Procedures

TKB has independent quality control department to control every quality inspection step from incoming material, production process, assembly, packing, as well as cargo shipment. We have established quality evaluation program for each process to assure best quality and most professional service to our customers.
We carry out full inspection reports like monthly/seasonal/yearly quality analysis report, CPK, FAI, IQ, OQ, PC, PPAP, PFMEA etc.
1.DFM quality control
2.Mold flow quality control
3.Mold steel hardness check
4.Electrodes Inspection
5.Core and Cavity Inspection
6.Pre-assembly Inspection
7.Trial Report and Sample inspection
8.Production process quality control
9.OQC inspection

Supply Chain Support

Extended quality insurance from worldwide branded suppliers to insure good quality and after-sales service to your molds and molded parts.
Mold Steel suppliers: Assab, Bohler,Buderus,Daido,Finkl,Groeditz, Hitach, LKM Steel, Saartahl, Schmolz+bickenbach
Mold Base: LKM, Mingli
Hot Runner: DME, Incoe, Inglass, Mold Masters, Yudo, Hasco, Syventive, Husky
Hydro-Cylinder: Parker, HPS, Merkle
Plastic Materials: Dupont, Chimei, LG, Basf, Bayer, DSM,Borealis,Formosa.
Texture: Mold Tech Yicksang

we'll ensure you always get
best results

FAQ

Date:2021-8-10

FAQ/ Frequently Asked Questions

 

 

As a plastic mold and injection molding company in China, we prepared answers for following most frequent asked queries for you, for more queries are always be here for you.

CONTACT US

CONTACT US

 

1. What info needed to get a correct mold quotation? How fast does it take to quote a project?

1)2D or 3D product drawing is needed for a mold quote;

2) If special requirement on mold steel, mold life, cavity quantity, hot runner requirement, part material, forecasted year quantity. Complete information will help to a most suitable cost effective, value added mold solution.

3) Normally take 2 working days to quote a new mold project seriously, and expedite quote is also available.

 

 

2. What’s the payment condition in TKB Mold?

1) New customer for mold: T/T 50% deposit, 50% against sample approval.

2) Mold modification: 100% upon sample approval.

3) Injection molding parts: 50% deposit, 50% before shipment.

4) VIP customer special terms: to be negotiated.

 

 

3. What’s the price terms/freight TKB mold will offer?

  • Normally TKB will offer ex-work TKB price for injection mold and plastic parts.
  • Free mold trial shotting samples free of charge and with freight to collect.
  • VIP customer special terms: to be negotiated.

 

 

4. What’s lead-time for a plastic mold and injection molding processes?

  • Injection mold lead-time counted from mold drawing approval and receipt of deposit to first mold trial(T1), and the difficulty of the molds determines how much time is needed, normally 20 to 60 days.
  • Injection molding lead-time counted from sample approval and receipt of deposit to production finish, order quantity determines how much time is needed, normally 7 to 15 days.

 

 

5. Will TKB send DMF to customer?

Yes,TKB Mold will send DFM (design for manufacturing) analysis and even mold flow analysis prior to the start of mold construction for customer review/approval.

 

 

6. Will TKB send mold design for approval?

After DMF approval, TKB will send the mould design for approval, and TKB will not start steel-cut before getting customers written approval of mold design.

 

 

7. How many plastic samples will be free provided?

TKB normally would provide 10~20 shots first mold trial shooting samples with gate(if have) free of charge according to the size of the parts, it would be freight to collect.

 

 

8. Which side provides plastic resin for injection mold trial?

TKB can provided plastic resin, if needed customer can provide the plastic resin the same.

 

 

9. How to make sure of quality before shipment?

shipment can be arranged only after TKB QC inspection PASS, or customer QC inspection PASS, or third-party inspection PASS if required. And TKB will always be there to provide full support.

 

 

10. How will TKB keep record of all mold data.

TKB will keep record of all final approved 2D, 3D mold drawing, modifications document, and send to customer for file to avoid future confusion in case engineering change is needed.

plastic mold factorylatest blogs
view more
variable pump injection molding machinery companies

By Emma 2022-11-1

What is variable pump injection molding machinery? Variable pump injection molding machinery is a type of injection molding machinery that uses a pump to vary the amount of material that is injected i...
plastic injection molding manufacturer

By Emma 2022-8-8

As a plastic injection molding manufacturer, we can manufacture a wide variety of products in a variety of sizes, forms, complexities and applications. This process requires injection molding equipmen...
making a plastic mold

By Emma 2022-7-27

Plastic injection molding is one of the fastest manufacturing techniques available today. The liquid plastic is injected into the mold, where it cools, solidifies and is ejected. The same mold can be ...
looking for medical plastic moulding parts

By Emma 2022-6-2

As minimally invasive procedures and implants become more common, smaller and more complex medical components are a major trend in healthcare. Over the years, plastic injection molded medical devices ...
moulds plastic injection mold

By Emma 2022-9-2

A mould (or mold) is a device used to shape or form material using a pressure-induced force. Moulds are used in a wide variety of applications, including manufacturing, engineering and construction. M...
Customized plastic mold manufacturers

By Emma 2022-6-2

As a plastic molding company with years of experience in the field, we strive to provide the optimal solution for each client based on individual requirements. We can help with the design and developm...
phone case injection mold

By Emma 2022-6-16

custom plastic parts

By Emma 2022-8-3

Different injection molding machines to meet your needs for manufacturing different products; maximum. Experienced engineers, strict quality, skilled mold maker, well-trained product workers excellent...
desktop injection mold

By Emma 2022-8-3

Using hand forming machines, we are able to produce top quality parts. The resulting surface finish is similar to the fine finish found in steel production tools. Occasionally we noticed visible flow ...
automotive injection molding companies

By Emma 2022-10-25

Auto Accessories Short Description: TKB Mold China locate in Dongguan city, Guangdong province, China, the largest mold production base in China, with and convenient production supply chain and with T...
    Contact