WhatsApp: +86 19166273143 | emma.tan@tkbkl.com

About Mold Secondary Processing in Manufacturing

Mold secondary processing refers to the additional steps taken after a mold has been created to further refine the finished product. These processes can include trimming excess plastic, drilling holes, or adding surface textures to the final product. While the primary focus of mold manufacturing is to produce a high-quality mold, the secondary processing steps can significantly impact the overall product quality and efficiency.

 

One of the key benefits of mold secondary processing is increased efficiency. By refining the mold with additional processing, manufacturers can reduce production time, minimize waste, and improve the overall output. Additionally, secondary processing can help to reduce production costs by minimizing the amount of time and material required to produce a final product.

 

Another important factor in mold secondary processing is the ability to enhance product quality. Secondary processing can help to reduce defects and errors, leading to a higher-quality finished product. Additionally, the ability to refine the surface of a product through secondary processing can enhance the overall look and feel of a product, improving customer satisfaction and brand reputation.

 

Mold secondary processing can also be crucial in meeting specific customer requirements. By refining a mold with additional processing, manufacturers can ensure that their products meet the exact specifications and requirements of their customers.

 

Overall, mold secondary processing plays a critical role in the manufacturing process, helping to increase efficiency, reduce costs, and enhance product quality. With advancements in technology and innovative new processing techniques, manufacturers can continue to refine their molds and products to meet the ever-evolving needs of the market.

Mold Secondary Processing in Manufacturing LATEST PRODUCTS

Main Quality Control Procedures

TKB has independent quality control department to control every quality inspection step from incoming material, production process, assembly, packing, as well as cargo shipment. We have established quality evaluation program for each process to assure best quality and most professional service to our customers.
We carry out full inspection reports like monthly/seasonal/yearly quality analysis report, CPK, FAI, IQ, OQ, PC, PPAP, PFMEA etc.
1.DFM quality control
2.Mold flow quality control
3.Mold steel hardness check
4.Electrodes Inspection
5.Core and Cavity Inspection
6.Pre-assembly Inspection
7.Trial Report and Sample inspection
8.Production process quality control
9.OQC inspection

Supply Chain Support

Extended quality insurance from worldwide branded suppliers to insure good quality and after-sales service to your molds and molded parts.
Mold Steel suppliers: Assab, Bohler,Buderus,Daido,Finkl,Groeditz, Hitach, LKM Steel, Saartahl, Schmolz+bickenbach
Mold Base: LKM, Mingli
Hot Runner: DME, Incoe, Inglass, Mold Masters, Yudo, Hasco, Syventive, Husky
Hydro-Cylinder: Parker, HPS, Merkle
Plastic Materials: Dupont, Chimei, LG, Basf, Bayer, DSM,Borealis,Formosa.
Texture: Mold Tech Yicksang

நீங்கள் எப்போதும் பெறுவதை நாங்கள் உறுதி செய்வோம்
சிறந்த முடிவுகள்

அடிக்கடி கேட்கப்படும் கேள்விகள்

Date:2021-8-10

அடிக்கடி கேட்கப்படும் கேள்விகள்/ Frequently Asked Questions

 

 

As a plastic mold and injection molding company in China, we prepared answers for following most frequent asked queries for you, for more queries are always be here for you.

CONTACT US

CONTACT US

 

1. What info needed to get a correct mold quotation? How fast does it take to quote a project?

1)2D or 3D product drawing is needed for a mold quote;

2) If special requirement on mold steel, mold life, cavity quantity, hot runner requirement, part material, forecasted year quantity. Complete information will help to a most suitable cost effective, value added mold solution.

3) Normally take 2 working days to quote a new mold project seriously, and expedite quote is also available.

 

 

2. What’s the payment condition in TKB Mold?

1) New customer for mold: T/T 50% deposit, 50% against sample approval.

2) Mold modification: 100% upon sample approval.

3) Injection molding parts: 50% deposit, 50% before shipment.

4) VIP customer special terms: to be negotiated.

 

 

3. What’s the price terms/freight TKB mold will offer?

  • Normally TKB will offer ex-work TKB price for injection mold and plastic parts.
  • Free mold trial shotting samples free of charge and with freight to collect.
  • VIP customer special terms: to be negotiated.

 

 

4. What’s lead-time for a plastic mold and injection molding processes?

  • Injection mold lead-time counted from mold drawing approval and receipt of deposit to first mold trial(T1), and the difficulty of the molds determines how much time is needed, normally 20 to 60 days.
  • Injection molding lead-time counted from sample approval and receipt of deposit to production finish, order quantity determines how much time is needed, normally 7 to 15 days.

 

 

5. Will TKB send DMF to customer?

Yes,TKB Mold will send DFM (design for manufacturing) analysis and even mold flow analysis prior to the start of mold construction for customer review/approval.

 

 

6. Will TKB send mold design for approval?

After DMF approval, TKB will send the mould design for approval, and TKB will not start steel-cut before getting customers written approval of mold design.

 

 

7. How many plastic samples will be free provided?

TKB normally would provide 10~20 shots first mold trial shooting samples with gate(if have) free of charge according to the size of the parts, it would be freight to collect.

 

 

8. Which side provides plastic resin for injection mold trial?

TKB can provided plastic resin, if needed customer can provide the plastic resin the same.

 

 

9. How to make sure of quality before shipment?

shipment can be arranged only after TKB QC inspection PASS, or customer QC inspection PASS, or third-party inspection PASS if required. And TKB will always be there to provide full support.

 

 

10. How will TKB keep record of all mold data.

TKB will keep record of all final approved 2D, 3D mold drawing, modifications document, and send to customer for file to avoid future confusion in case engineering change is needed.

Mold Secondary Processing in Manufacturinglatest blogs
மேலும் பார்க்க
moulds plastic injection mold

எம்மா மூலம் 2022-9-2

A mould (or mold) is a device used to shape or form material using a pressure-induced force. Moulds are used in a wide variety of applications, including manufacturing, engineering and construction. M...
விருப்ப அச்சு

எம்மா மூலம் 2022-6-25

Forming is a manufacturing process that involves the use of a fixed frame to shape a liquid or malleable raw material; known as a mold or matrix. A mold is usually a cavity container, usually made of ...
துல்லிய ஊசி மோல்டிங் நிறுவனங்கள்

எம்மா மூலம் 2022-10-25

Precision injection molding is a process by which a manufacturer produces plastic parts with very specific dimensions and tolerances. It is a critical process for many industries, and choosing the rig...
large plastic molds Company

எம்மா மூலம் 2023-3-8

Large plastic molds are molds used in the manufacturing process of producing large plastic parts or products. These molds can be made of steel, aluminum, or other metals and are designed to withstand ...
பிளாஸ்டிக் ஊசி மோல்டிங் நிறுவனங்கள்

எம்மா மூலம் 2022-11-1

Working with a plastic injection molding company can be a great way to get your product made quickly and efficiently. What are plastic injection molding companies? Plastic injection molding is a manuf...
சீனாவில் தானியங்கி ஊசி அச்சு

எம்மா மூலம் 2023-2-22

உலகின் மிகப்பெரிய வாகன ஊசி அச்சுகளை உற்பத்தி செய்யும் நாடுகளில் சீனாவும் ஒன்றாகும், மேலும் இந்த பகுதியில் நிபுணத்துவம் பெற்ற பல நிறுவனங்கள் உள்ளன.இந்த நிறுவனங்கள் பரந்த அளவிலான வாகன ஊசிகளை வழங்குகின்றன.
பிளாஸ்டிக் நாற்காலி அச்சு

எம்மா மூலம் 2022-9-2

பிளாஸ்டிக் நாற்காலி அச்சு என்பது ஒரு பிளாஸ்டிக் நாற்காலியின் வடிவத்தை உருவாக்கப் பயன்படும் ஒரு சாதனம் ஆகும். இது நாற்காலியின் வடிவத்தை உருவாக்குவதற்கு ஒன்றாக இணைக்கப்பட்ட இரண்டு பகுதிகளால் ஆனது. பிளாஸ்டிக் பின்னர் t...
mold plastic maker

எம்மா மூலம் 2022-12-7

Classification of injection molds: According to the molding process: hot work mold and cold work mold According to molding materials: metal molds and non-metal molds Divided by production volume: samp...
டெஸ்க்டாப் ஊசி அச்சு

எம்மா மூலம் 2022-12-7

mold design The location of the gate is designed to ensure that it fills the thick walls first to avoid stagnation and premature hardening of the polymer melt. Increase the number of gates and reduce ...
பாதுகாப்பு கண்ணாடி ஊசி அச்சு

எம்மா மூலம் 2022-8-2

The process can produce products with fixed cross-sectional profiles, such as wire and cable coatings, plastic tubes for printing inks, some hollow profiles and various solid profiles. The material is...
தொடர்பு கொள்ளவும்