WhatsApp: +86 19166273143 | emma.tan@tkbkl.com

About mold plastic maker

Classification of injection molds:
According to the molding process: hot work mold and cold work mold

According to molding materials: metal molds and non-metal molds

Divided by production volume: sample mold (simple mold) and mass production mold

Divided by mold material: soft mold and hard mold

2. Mold types classified by molding materials:

Metal material molds are divided into casting molds, die-casting molds, stamping molds (bending, punching, blanking, stretching, shaping, flanging, etc.), forging molds (hot forging, cold heading, rolling, drawing, extrusion, etc.), powder metallurgy mold (isostatic pressing powder metallurgy, metal injection molding powder metallurgy, powder forging powder metallurgy, pressure sintering powder metallurgy), etc.

Non-metal material molds are divided into plastic molding molds (extrusion molding, blow molding, injection molding, compression molding, gas-assisted, vacuum suction molding, etc.), rubber molds, glass molds, ceramic molds, powder metallurgy molds (PTFE), etc.

Pretreatment of raw materials or inserts (not all raw materials or inserts require pretreatment – drying, preheating, depending on the degree of product technical requirements, type of raw materials, temperature conditions, for metal inserts, generally need to be pretreated in winter hot.)

Pay attention to the raw material drying (baking) process.

There must be clear drying process documents and operating procedures.

Detection and control of moisture content before injection molding.

The baking material equipment has a status mark and the equipment is in good condition.

The records of raw materials entering and leaving the warehouse are clear and clear, and are implemented in accordance with regulations without confusion.

Moisture-proof conditions during the use of raw materials after baking and during turnover (turnaround packaging and temporary storage conditions in the factory).

mold plastic maker LATEST PRODUCTS

Main Quality Control Procedures

TKB has independent quality control department to control every quality inspection step from incoming material, production process, assembly, packing, as well as cargo shipment. We have established quality evaluation program for each process to assure best quality and most professional service to our customers.
We carry out full inspection reports like monthly/seasonal/yearly quality analysis report, CPK, FAI, IQ, OQ, PC, PPAP, PFMEA etc.
1.DFM quality control
2.Mold flow quality control
3.Mold steel hardness check
4.Electrodes Inspection
5.Core and Cavity Inspection
6.Pre-assembly Inspection
7.Trial Report and Sample inspection
8.Production process quality control
9.OQC inspection

Supply Chain Support

Extended quality insurance from worldwide branded suppliers to insure good quality and after-sales service to your molds and molded parts.
Mold Steel suppliers: Assab, Bohler,Buderus,Daido,Finkl,Groeditz, Hitach, LKM Steel, Saartahl, Schmolz+bickenbach
Mold Base: LKM, Mingli
Hot Runner: DME, Incoe, Inglass, Mold Masters, Yudo, Hasco, Syventive, Husky
Hydro-Cylinder: Parker, HPS, Merkle
Plastic Materials: Dupont, Chimei, LG, Basf, Bayer, DSM,Borealis,Formosa.
Texture: Mold Tech Yicksang

நீங்கள் எப்போதும் பெறுவதை நாங்கள் உறுதி செய்வோம்
சிறந்த முடிவுகள்

அடிக்கடி கேட்கப்படும் கேள்விகள்

Date:2021-8-10

அடிக்கடி கேட்கப்படும் கேள்விகள்/ Frequently Asked Questions

 

 

As a plastic mold and injection molding company in China, we prepared answers for following most frequent asked queries for you, for more queries are always be here for you.

CONTACT US

CONTACT US

 

1. What info needed to get a correct mold quotation? How fast does it take to quote a project?

1)2D or 3D product drawing is needed for a mold quote;

2) If special requirement on mold steel, mold life, cavity quantity, hot runner requirement, part material, forecasted year quantity. Complete information will help to a most suitable cost effective, value added mold solution.

3) Normally take 2 working days to quote a new mold project seriously, and expedite quote is also available.

 

 

2. What’s the payment condition in TKB Mold?

1) New customer for mold: T/T 50% deposit, 50% against sample approval.

2) Mold modification: 100% upon sample approval.

3) Injection molding parts: 50% deposit, 50% before shipment.

4) VIP customer special terms: to be negotiated.

 

 

3. What’s the price terms/freight TKB mold will offer?

  • Normally TKB will offer ex-work TKB price for injection mold and plastic parts.
  • Free mold trial shotting samples free of charge and with freight to collect.
  • VIP customer special terms: to be negotiated.

 

 

4. What’s lead-time for a plastic mold and injection molding processes?

  • Injection mold lead-time counted from mold drawing approval and receipt of deposit to first mold trial(T1), and the difficulty of the molds determines how much time is needed, normally 20 to 60 days.
  • Injection molding lead-time counted from sample approval and receipt of deposit to production finish, order quantity determines how much time is needed, normally 7 to 15 days.

 

 

5. Will TKB send DMF to customer?

Yes,TKB Mold will send DFM (design for manufacturing) analysis and even mold flow analysis prior to the start of mold construction for customer review/approval.

 

 

6. Will TKB send mold design for approval?

After DMF approval, TKB will send the mould design for approval, and TKB will not start steel-cut before getting customers written approval of mold design.

 

 

7. How many plastic samples will be free provided?

TKB normally would provide 10~20 shots first mold trial shooting samples with gate(if have) free of charge according to the size of the parts, it would be freight to collect.

 

 

8. Which side provides plastic resin for injection mold trial?

TKB can provided plastic resin, if needed customer can provide the plastic resin the same.

 

 

9. How to make sure of quality before shipment?

shipment can be arranged only after TKB QC inspection PASS, or customer QC inspection PASS, or third-party inspection PASS if required. And TKB will always be there to provide full support.

 

 

10. How will TKB keep record of all mold data.

TKB will keep record of all final approved 2D, 3D mold drawing, modifications document, and send to customer for file to avoid future confusion in case engineering change is needed.

mold plastic makerlatest blogs
மேலும் பார்க்க
பிளெண்டர் பிளாஸ்டிக் ஊசி அச்சு

எம்மா மூலம் 2022-8-6

கடினமான தயாரிப்பு கட்டமைப்புகளை சவால் செய்வதை நாங்கள் விரும்புகிறோம். தொழில்முறை ஊசி அச்சு பொறியாளர்களால் முழுமையான அச்சு வடிவமைப்பின் மூலம், பல்வேறு மொபைல் தொகுதிகள் மற்றும் சிக்கலான கோர்-புலிங் அச்சுகள் மற்றும் பெரிய-...
பெரிய பிளாஸ்டிக் அச்சு நிறுவனங்கள்

எம்மா மூலம் 2022-6-1

TKB Mold is short for ThinkBus Kalung (Dongguan) Manufacturing Co., Ltd, focus on top quality plastic injection mold manufacturing and injection molding for industries of medical, automotive, aerospac...
துல்லியமான ஊசி அச்சு

எம்மா மூலம் 2022-6-14

ஊசி மோல்டிங் சகிப்புத்தன்மை நெருக்கமான சகிப்புத்தன்மை மற்றும் தனிப்பயன் ஊசி மோல்டிங் இயந்திரங்களில் வல்லுநர்கள் சீல் செய்வதன் முக்கியத்துவம் மற்றும் முன்னெச்சரிக்கைகளைப் புரிந்துகொள்கிறார்கள். மாறி பகுதி சமதளம் மற்றும் குறைபாடுள்ள கேஸ்கெட் வகை கடல்...
பெரிய பிளாஸ்டிக் அச்சுகளை எப்படி உருவாக்குவது

எம்மா மூலம் 2022-10-24

Large Plastic Molding Part Short Description: TKB specialize in injection molding service for Large plastic molding part. TKB is certified with ISO9001:2015.We are strictly follow the correct procedur...
சீனாவில் பெரிய ஊசி வடிவங்கள்

எம்மா மூலம் 2023-2-23

இன்ஜெக்ஷன் மோல்டிங் உட்பட உற்பத்தி செய்வதில் சீனா ஒரு முக்கிய உலகளாவிய வீரராக அறியப்படுகிறது. நீங்கள் சீனாவில் பெரிய பிளாஸ்டிக் ஊசி அச்சுகளை தேடுகிறீர்களானால், இதை வழங்கக்கூடிய பல நிறுவனங்கள் உள்ளன.
Mold Secondary Processing in Manufacturing

எம்மா மூலம் 2023-2-25

Mold secondary processing refers to the additional steps taken after a mold has been created to further refine the finished product. These processes can include trimming excess plastic, drilling holes...
பிளாஸ்டிக் ஊசி வடிவ உற்பத்தியாளர்

எம்மா மூலம் 2022-7-15

Injection molding is a method of injecting heated and molten plastic material into a mold, and then cooling and solidifying to obtain a molded product. This method is suitable for mass production of p...
plastic chair mold

எம்மா மூலம் 2022-9-2

A plastic chair mold is an important tool for any business that manufactures plastic chairs. This mold is used to create the shape of the chair and is a critical part of the manufacturing process. Wit...
பிளாஸ்டிக் ஊசி வடிவ உற்பத்தியாளர்

எம்மா மூலம் 2022-8-8

As a plastic injection molding manufacturer, we can manufacture a wide variety of products in a variety of sizes, forms, complexities and applications. This process requires injection molding equipmen...
rapid injection molding

எம்மா மூலம் 2022-8-8

Rapid injection molding is the process of making injection molds for prototypes, bridges, and short production run parts in less time and at a lower cost than full production molds. Injection molds, t...
தொடர்பு கொள்ளவும்