WhatsApp: +86 19166273143 | emma.tan@tkbkl.com

About plastic injection mould design

Plastic injection molding is the process of choice for manufacturing plastic parts. Injection molding is used to make many things such as electronic housings, containers, bottle caps, car interiors, combs and most other plastic products available today. Since multiple parts can be produced in each cycle using a multi-cavity injection mold, it is ideal for producing large numbers of plastic parts. Some of the advantages of injection molding are high tolerance accuracy, good repeatability, a wide range of material options, low labor costs, low scrap losses, and little need to finish the part after molding. Some of the disadvantages of this process are expensive up-front tool investment and process limitations.

Using the latest computer-aided design and highly skilled workforce, we offer the advantages of data transfer, modeling, digital information and reverse engineering in the manufacture of plastic injection molds.

 

plastic injection mould design LATEST PRODUCTS

Main Quality Control Procedures

TKB has independent quality control department to control every quality inspection step from incoming material, production process, assembly, packing, as well as cargo shipment. We have established quality evaluation program for each process to assure best quality and most professional service to our customers.
We carry out full inspection reports like monthly/seasonal/yearly quality analysis report, CPK, FAI, IQ, OQ, PC, PPAP, PFMEA etc.
1.DFM quality control
2.Mold flow quality control
3.Mold steel hardness check
4.Electrodes Inspection
5.Core and Cavity Inspection
6.Pre-assembly Inspection
7.Trial Report and Sample inspection
8.Production process quality control
9.OQC inspection

Supply Chain Support

Extended quality insurance from worldwide branded suppliers to insure good quality and after-sales service to your molds and molded parts.
Mold Steel suppliers: Assab, Bohler,Buderus,Daido,Finkl,Groeditz, Hitach, LKM Steel, Saartahl, Schmolz+bickenbach
Mold Base: LKM, Mingli
Hot Runner: DME, Incoe, Inglass, Mold Masters, Yudo, Hasco, Syventive, Husky
Hydro-Cylinder: Parker, HPS, Merkle
Plastic Materials: Dupont, Chimei, LG, Basf, Bayer, DSM,Borealis,Formosa.
Texture: Mold Tech Yicksang

we'll ensure you always get
best results

FAQ

Date:2021-8-10

FAQ/ Frequently Asked Questions

 

 

As a plastic mold and injection molding company in China, we prepared answers for following most frequent asked queries for you, for more queries are always be here for you.

CONTACT US

CONTACT US

 

1. What info needed to get a correct mold quotation? How fast does it take to quote a project?

1)2D or 3D product drawing is needed for a mold quote;

2) If special requirement on mold steel, mold life, cavity quantity, hot runner requirement, part material, forecasted year quantity. Complete information will help to a most suitable cost effective, value added mold solution.

3) Normally take 2 working days to quote a new mold project seriously, and expedite quote is also available.

 

 

2. What’s the payment condition in TKB Mold?

1) New customer for mold: T/T 50% deposit, 50% against sample approval.

2) Mold modification: 100% upon sample approval.

3) Injection molding parts: 50% deposit, 50% before shipment.

4) VIP customer special terms: to be negotiated.

 

 

3. What’s the price terms/freight TKB mold will offer?

  • Normally TKB will offer ex-work TKB price for injection mold and plastic parts.
  • Free mold trial shotting samples free of charge and with freight to collect.
  • VIP customer special terms: to be negotiated.

 

 

4. What’s lead-time for a plastic mold and injection molding processes?

  • Injection mold lead-time counted from mold drawing approval and receipt of deposit to first mold trial(T1), and the difficulty of the molds determines how much time is needed, normally 20 to 60 days.
  • Injection molding lead-time counted from sample approval and receipt of deposit to production finish, order quantity determines how much time is needed, normally 7 to 15 days.

 

 

5. Will TKB send DMF to customer?

Yes,TKB Mold will send DFM (design for manufacturing) analysis and even mold flow analysis prior to the start of mold construction for customer review/approval.

 

 

6. Will TKB send mold design for approval?

After DMF approval, TKB will send the mould design for approval, and TKB will not start steel-cut before getting customers written approval of mold design.

 

 

7. How many plastic samples will be free provided?

TKB normally would provide 10~20 shots first mold trial shooting samples with gate(if have) free of charge according to the size of the parts, it would be freight to collect.

 

 

8. Which side provides plastic resin for injection mold trial?

TKB can provided plastic resin, if needed customer can provide the plastic resin the same.

 

 

9. How to make sure of quality before shipment?

shipment can be arranged only after TKB QC inspection PASS, or customer QC inspection PASS, or third-party inspection PASS if required. And TKB will always be there to provide full support.

 

 

10. How will TKB keep record of all mold data.

TKB will keep record of all final approved 2D, 3D mold drawing, modifications document, and send to customer for file to avoid future confusion in case engineering change is needed.

plastic injection mould designlatest blogs
view more
Unleashing the Potential of China’s High-Quality Mold Industry

By Emma 2023-2-25

China's mold industry has experienced rapid growth in recent years, with the country emerging as a major player in the global mold market. One of the key factors driving this growth is China's focus o...
TPR Overmolding Mold: The Key to Producing Soft-Touch Products

By Emma 2023-2-27

Thermoplastic elastomer (TPE) overmolding, also known as TPR overmolding, is becoming increasingly popular for creating soft-touch products. TPR overmolding molds are used to produce a range of soft-t...
From Design to Production: How China’s High-Quality Mold Industry Ensures Success

By Emma 2023-2-27

China's mold industry has been growing rapidly over the years, with many companies offering high-quality molds that meet international standards. From design to production, Chinese mold manufacturers ...
plastic chair mold

By Emma 2022-9-2

A plastic chair mold is an important tool for any business that manufactures plastic chairs. This mold is used to create the shape of the chair and is a critical part of the manufacturing process. Wit...
one-stop injection mold plastics Service

By Emma 2022-6-2

 This injection molding process ensures end-to-end product development life cycle solutions. You can expect a new and complex form of Plastic Injection Mold as per your needs and specifications. In ad...
plastic injection molding parts

By Emma 2022-9-20

When it comes to plastic injection molding, it's important to select the best parts for your needs. There are a variety of factors to consider, including the type of plastic, the dimensions of the par...
chinese mold

By Emma 2022-6-6

If your molds are for automotive parts or high-quality medical or cosmetic parts, I suggest finding some medium or large mold-making company, even if they quoted a high price. Because they always have...
mold for plastic injection

By Emma 2022-9-3

Mold can be a big issue when it comes to plastic injection. In order to produce high-quality parts, it is important to understand the basics of mold and how it can affect the process. What is mold for...
mold manufacturers in china

By Emma 2022-10-14

Mold making is an important part of the manufacturing process of various products. In China, there are many mold manufacturers, and it is difficult to choose a suitable mold manufacturer according to ...
medical injection mold

By Emma 2022-8-3

Compared with traditional injection molding, medical injection molding requires more specialized equipment. In the field of medical devices, the smallest components are often the most important in rel...
Contact