WhatsApp: +86 19166273143 | emma.tan@tkbkl.com

About large rectangular chocolate plastic molds

What are the different types of rectangular chocolate molds?

There are a few different types of rectangular chocolate molds. The most common type is the two-piece mold, which is made up of two halves that fit together. This type of mold is ideal for making chocolates with a smooth, even surface. Another type of rectangular chocolate mold is the three-piece mold. This mold has three parts: a top, a bottom, and a middle piece. This type of mold is ideal for making chocolates with a textured surface. Finally, there is the four-piece mold. This mold has four parts: two top pieces and two bottom pieces. This type of mold is ideal for making chocolates with a detailed surface.

When choosing a chocolate mold, there are a few factors you should consider. The first is the size of the mold. If you are making a large batch of chocolate, you will need a larger mold. The second factor is the shape of the mold. If you are looking for a specific shape, you will need to find a mold that corresponds to that shape. The third factor is the type of chocolate you will be using. Some chocolate molds are designed for a specific type of chocolate, so you will need to make sure the chocolate you are using is compatible with the mold.

big injection moulds

 

 

large rectangular chocolate plastic molds LATEST PRODUCTS

Main Quality Control Procedures

TKB has independent quality control department to control every quality inspection step from incoming material, production process, assembly, packing, as well as cargo shipment. We have established quality evaluation program for each process to assure best quality and most professional service to our customers.
We carry out full inspection reports like monthly/seasonal/yearly quality analysis report, CPK, FAI, IQ, OQ, PC, PPAP, PFMEA etc.
1.DFM quality control
2.Mold flow quality control
3.Mold steel hardness check
4.Electrodes Inspection
5.Core and Cavity Inspection
6.Pre-assembly Inspection
7.Trial Report and Sample inspection
8.Production process quality control
9.OQC inspection

Supply Chain Support

Extended quality insurance from worldwide branded suppliers to insure good quality and after-sales service to your molds and molded parts.
Mold Steel suppliers: Assab, Bohler,Buderus,Daido,Finkl,Groeditz, Hitach, LKM Steel, Saartahl, Schmolz+bickenbach
Mold Base: LKM, Mingli
Hot Runner: DME, Incoe, Inglass, Mold Masters, Yudo, Hasco, Syventive, Husky
Hydro-Cylinder: Parker, HPS, Merkle
Plastic Materials: Dupont, Chimei, LG, Basf, Bayer, DSM,Borealis,Formosa.
Texture: Mold Tech Yicksang

we'll ensure you always get
best results

FAQ

Date:2021-8-10

FAQ/ Frequently Asked Questions

 

 

As a plastic mold and injection molding company in China, we prepared answers for following most frequent asked queries for you, for more queries are always be here for you.

CONTACT US

CONTACT US

 

1. What info needed to get a correct mold quotation? How fast does it take to quote a project?

1)2D or 3D product drawing is needed for a mold quote;

2) If special requirement on mold steel, mold life, cavity quantity, hot runner requirement, part material, forecasted year quantity. Complete information will help to a most suitable cost effective, value added mold solution.

3) Normally take 2 working days to quote a new mold project seriously, and expedite quote is also available.

 

 

2. What’s the payment condition in TKB Mold?

1) New customer for mold: T/T 50% deposit, 50% against sample approval.

2) Mold modification: 100% upon sample approval.

3) Injection molding parts: 50% deposit, 50% before shipment.

4) VIP customer special terms: to be negotiated.

 

 

3. What’s the price terms/freight TKB mold will offer?

  • Normally TKB will offer ex-work TKB price for injection mold and plastic parts.
  • Free mold trial shotting samples free of charge and with freight to collect.
  • VIP customer special terms: to be negotiated.

 

 

4. What’s lead-time for a plastic mold and injection molding processes?

  • Injection mold lead-time counted from mold drawing approval and receipt of deposit to first mold trial(T1), and the difficulty of the molds determines how much time is needed, normally 20 to 60 days.
  • Injection molding lead-time counted from sample approval and receipt of deposit to production finish, order quantity determines how much time is needed, normally 7 to 15 days.

 

 

5. Will TKB send DMF to customer?

Yes,TKB Mold will send DFM (design for manufacturing) analysis and even mold flow analysis prior to the start of mold construction for customer review/approval.

 

 

6. Will TKB send mold design for approval?

After DMF approval, TKB will send the mould design for approval, and TKB will not start steel-cut before getting customers written approval of mold design.

 

 

7. How many plastic samples will be free provided?

TKB normally would provide 10~20 shots first mold trial shooting samples with gate(if have) free of charge according to the size of the parts, it would be freight to collect.

 

 

8. Which side provides plastic resin for injection mold trial?

TKB can provided plastic resin, if needed customer can provide the plastic resin the same.

 

 

9. How to make sure of quality before shipment?

shipment can be arranged only after TKB QC inspection PASS, or customer QC inspection PASS, or third-party inspection PASS if required. And TKB will always be there to provide full support.

 

 

10. How will TKB keep record of all mold data.

TKB will keep record of all final approved 2D, 3D mold drawing, modifications document, and send to customer for file to avoid future confusion in case engineering change is needed.

large rectangular chocolate plastic moldslatest blogs
view more
mold flow analysis for die casting

By Emma 2022-9-1

Mold flow analysis is a process that is used to study the flow of molten metal in the die casting process. This analysis can help to identify potential problems with the casting process and help to im...
Describes how the automotive industry uses large plastic molds with inserts to reduce costs and increase efficiency

By Emma 2023-2-25

The automotive industry is a major user of large plastic molds with inserts, as these molds provide several advantages that can help reduce costs and increase efficiency.   One way in which the a...
TKB Mold China: Providing Customized Molding Solutions for Any Industry

By Emma 2023-2-27

TKB Mold is a China-based company that specializes in providing customized molding solutions for various industries. They have years of experience in the field and are committed to providing high-qual...
top injection molding companies

By Emma 2022-11-25

When choosing plastic injection mold manufacturer, you’ll want to keep several factors in mind: cost effectiveness, scalability, environmental impact and liability. Here are four considerations to mak...
injection mold design

By Emma 2022-6-22

What is Injection Molding? Injection Molding is a manufacturing process for producing parts in large volume. It is most typically used in mass-production processes where the same part is being created...
tooling manufacturing

By Emma 2022-6-6

Mold making is the process used to duplicate three dimensional models or objects. A model is an object that has depth, and an original model can be made from almost anything. If you were making your o...
Improving Quality with Mold Secondary Processing

By Emma 2023-2-25

Mold secondary processing is an important step in improving the quality of molded products. Secondary processing can be used to refine and improve the final product, ensuring that it meets the require...
mold making suppliers

By Emma 2022-6-2

You also want to know the quality of the steel produced by the Chinese source you are considering and the complexity of the tooling. Due to the poor quality of steel, the molds produced by some inject...
Automation in Mold Secondary Processing: Advantages and Limitations

By Emma 2023-3-2

Mold secondary processing is the stage of manufacturing where molded products undergo additional finishing and assembly operations to achieve the desired final product. Automation in mold secondary pr...
automotive injection mold

By Emma 2022-7-1

Injection mold is a tool for auxiliary processing and production of plastic products. Plastic can be processed at one time, with short processing time and guaranteed precision. The elastic deformation...
Contact