射出成形およびプロトタイピング会社向けの製品を設計する方法
射出成形 is one of the technologies that is so important in our everyday life, we hardly notice it. We are constantly surrounded by objects created through this process. Almost everything made of plastic (almost everything) is made by injection molding. As a product designer, it is important to understand this process! let’s start.
射出成形とは
It is a process used to manufacture a wide variety of items from small components to large components. It uses granular plastic that is gravity-fed from a hopper, forced through a screw-type ram into a heated chamber, melted, and pressed against a mold. It was then cooled and removed as a solid fraction. Rapid injection molding uses aluminum molds, which are produced quickly, while mass production typically uses steel molds.
Injection molding manufacturing makes it possible to produce parts in high volumes. That’s why it’s often used in mass production processes that require thousands or even millions of parts. In fact, the biggest downside is that the tool time and cost required to set up the molding process makes the technology unsuitable for low-volume production runs (fortunately we have 3D printing technology now).
The injection molding process cycle is divided into 4 phases and typically takes 2 seconds to 2 minutes per part
Clamping injection molding
This is the part of the mold where the two halves are securely closed by the clamping device. Hydraulic power is used to hold the clamps in place while a specific material (usually thermoplastic) is injected.
injection
At this stage, raw plastic or pellets are fed into the injection molding machine, pushed through the injection unit, melted, and injected into the mold.
cool down
Cooling allows the molten plastic to solidify and form the shape of the mold. Different parts and assemblies have specific cooling times, which depend on the maximum wall thickness of the part and the thermodynamic properties of the plastic material
catapult
The ejection system is used to push the molded part out of the clamping unit. A release agent can be sprayed on the cavity surface before injection to facilitate demoulding and prevent damage to new parts.
What are the benefits of injection molding?
low production cost
In injection molding manufacturing, the unit price is extremely low. The most important cost is the setup cost. Prices tend to drop dramatically as more parts are produced. Once the initial cost of manufacturing is paid for, the profit margins are very high. This makes financial sense in terms of business as long as there is demand to meet production.
Low scrap rate
Unlike traditional manufacturing processes, where a significant portion of the original block or sheet is cut off during production, injection molding cuts with precision, and waste plastic often comes from spilled material that leaks from the cavity. It can also come from runners, sprues, and gate locations.
repeatable and consistent
As a process used in high-volume production, injection molding is well suited to producing nearly identical parts. Every part produced will be identical to the first, which is important for consistency and reliability.
Of course, injection molding isn’t perfect. But its advantages often outweigh the disadvantages.
A major challenge in injection molding is designing the mold. The main focus is usually on the finished product, but without the molds that form the parts, no parts will be made. The design aspect of components is often overlooked, but is the most important.
As a source of experienced engineers and product designers, we can provide you with an individual or a professional team to help you develop your injection molded part from scratch. We’ll match you with pre-vetted, highly qualified design professionals. We also offer contract manufacturing services.
-
Creating the Perfect Plastic Chair Mold for Ultimate Durability and Comfort
2023-12-13
Plastic chairs have become an integral part of our lives. From homes to offices, cafes to outdoor events, plastic chairs...
詳細を見る -
Creating High-Quality Aerospace Mold for Superior Performance
2023-5-12
The aerospace industry requires high-quality and precision parts to ensure superior performance and safety. Aerospace mo...
詳細を見る -
Designing an Efficient Plastic Fish Crate Mold: Enhancing Productivity and Sustainability
2023-11-25
The fishing industry plays a crucial role in meeting the global demand for seafood. To ensure the safe transportation of...
詳細を見る -
Plastic Pallet Molds: Industry News and Technology Developments
2024-2-19
As an important logistics container, plastic pallets are widely used in warehousing, transportation, packaging, and othe...
詳細を見る -
Efficient Injection Mold Manufacturing for High-Quality Products
2023-4-27
Injection molding is a popular manufacturing process used to produce a vast array of products across various industries....
詳細を見る -
Creating the Perfect Plastic Chair Mould: A Guide to Achieving Quality and Efficiency
2023-11-12
Introduction: Plastic chairs are widely used in households, offices, and outdoor spaces due to their durability, afforda...
詳細を見る