WhatsApp: +86 19166273143 | emma.tan@tkbkl.com

About Describes how the automotive industry uses large plastic molds with inserts to reduce costs and increase efficiency

The automotive industry is a major user of large plastic molds with inserts, as these molds provide several advantages that can help reduce costs and increase efficiency.

 

One way in which the automotive industry uses large plastic molds with inserts is through the creation of multi-cavity molds. Multi-cavity molds allow for the production of multiple parts simultaneously, which can significantly reduce cycle time and increase production efficiency. By using large plastic molds with inserts, manufacturers can create complex parts with multiple features, such as interior panels or door handles, in a single mold. This reduces the need for multiple molds and reduces the overall cost of production.

 

Another way in which the automotive industry uses large plastic molds with inserts is through the creation of family molds. Family molds are similar to multi-cavity molds, but they allow for the production of multiple parts with different designs or features in a single mold. This reduces the need for separate molds for each part, which can be costly and time-consuming to produce. By using large plastic molds with inserts, manufacturers can create family molds that are capable of producing multiple parts with different designs, features, or materials, which can significantly reduce costs and increase efficiency.

 

In addition to multi-cavity and family molds, the automotive industry also uses large plastic molds with inserts for the creation of overmolded parts. Overmolding is a process in which a second material is molded over a pre-existing part, such as a plastic handle over a metal frame. By using large plastic molds with inserts, manufacturers can create overmolded parts with complex shapes and geometries, which can be difficult or impossible to achieve with traditional molds. This reduces the need for secondary operations, such as assembly or bonding, which can be costly and time-consuming.

 

Overall, the use of large plastic molds with inserts in the automotive industry provides several advantages, including reduced costs, increased efficiency, and improved part quality. By utilizing these molds, manufacturers can streamline production processes, reduce waste, and increase profitability, while meeting the high demands of the automotive industry.

Describes how the automotive industry uses large plastic molds with inserts to reduce costs and increase efficiency LATEST PRODUCTS
 overmolding mold

Umspritzen von Form

Overmolding is a process in which a second material is molded onto a previously molded part, creating a multi-material part with unique properties. An overmoldi...
 molding part for electronic connectors

Formteil für elektronische Steckverbinder

Molding parts for electronic connectors are specialized components used in the manufacturing of electronic devices that require a connection between different c...
 Molding part for coffee maker

Formteil für Kaffeemaschine

A molding part for coffee maker is a vital component of the appliance. It is responsible for holding and filtering the coffee grounds during the brewing process...
 molding part for airplane handle

Formteil für Flugzeuggriff

Molding parts play an important role in the aviation industry. Airplane handles, in particular, require high-quality and durable molding parts to ensure reliabl...
 plastic mold for home appliance

Kunststoffformen für Haushaltsgeräte

Plastic mold for home appliances is a vital part of the manufacturing process for companies in the home appliance industry. These molds are used to produce high...
 precision plastic mould

Präzisionsform aus Kunststoff

Precision plastic molds are high-precision tools used in the manufacturing of plastic parts with demanding dimensional and quality specifications. These molds a...
 PRODUCTS

PRODUKTE

 industrial plastic parts mold

Form für industrielle Kunststoffteile

Industrial plastic parts mold is a tool that is used to produce plastic parts in large quantities for industrial purposes. The mold is designed to create a spec...
 tpe overmolding mold

TPE-Umspritzform

TPE (Thermoplastic Elastomer) overmolding molds are specialized tools used to produce multi-material parts that combine the properties of rigid plastics with th...
wir sorgen dafür, dass Sie immer bekommen
Beste Ergebnisse

tkbmold-Video

Prüfung der Formenbaufähigkeit
TKB Mold China-Wunsch allen einen wunderbaren Jahresanfang 2022
Spritzgusshersteller Heiße Produktion im kalten Winter
Spritzgusshersteller Heiße Produktion im kalten Winter
Was bedeutet Engagement für eine Spritzgussfabrik [TKB Mold China]?
Formqualitätskontrolle [Möchten Sie wissen, dass Ihre Formqualität korrekt kontrolliert wird?]
Mold Maker China Special SONNTAG bei [TKB Mould]

FAQ

Datum: 2021-8-10

FAQ/ Häufig gestellte Fragen

 

 

Als Kunststoffform- und Spritzgussunternehmen in China haben wir Antworten auf die am häufigsten gestellten Fragen für Sie vorbereitet, denn weitere Fragen sind immer für Sie da.

CONTACT US

KONTAKTIERE UNS

 

1. Welche Informationen sind erforderlich, um ein korrektes Angebot für Formen zu erhalten?Wie schnell dauert es, ein Projektangebot zu erstellen?

1) Für ein Formangebot ist eine 2D- oder 3D-Produktzeichnung erforderlich;

2) Bei besonderen Anforderungen an Formstahl, Formlebensdauer, Kavitätenmenge, Heißkanalanforderungen, Teilematerial, prognostizierte Jahresmenge.Vollständige Informationen helfen bei der Suche nach einer am besten geeigneten kostengünstigen Formlösung mit Mehrwert.

3) Nehmen Sie normalerweise 2 Arbeitstage in Anspruch, um ein ernsthaftes Angebot für ein neues Formprojekt zu erstellen, und ein beschleunigtes Angebot ist ebenfalls verfügbar.

 

 

2. Was ist die Zahlungsbedingung in TKB Mold?

1) Neukunde für Form: T/T 50% Anzahlung, 50% gegen Musterfreigabe.

2) Werkzeugmodifikation: 100% nach Musterfreigabe.

3) Spritzgussteile: 50% Anzahlung, 50% vor Versand.

4) Sonderkonditionen für VIP-Kunden: zu verhandeln.

 

 

3. Was sind die Preiskonditionen/Frachten, die TKB Mold anbieten wird?

  • Normalerweise bietet TKB TKB-Preise ab Werk für Spritzguss- und Kunststoffteile an.
  • Kostenlose Formprobe-Schießmuster kostenlos und frachtfrei abzuholen.
  • Sonderkonditionen für VIP-Kunden: zu verhandeln.

 

 

4. Was ist die Vorlaufzeit für eine Kunststoffform und Spritzgussverfahren?

  • Die Lieferzeit für Spritzgussformen wird von der Genehmigung der Formzeichnung und dem Eingang der Anzahlung bis zum ersten Formversuch (T1) gezählt, und die Schwierigkeit der Formen bestimmt, wie viel Zeit benötigt wird, normalerweise 20 bis 60 Tage.
  • Die Vorlaufzeit für das Spritzgießen wird von der Mustergenehmigung und dem Eingang der Anzahlung bis zum Produktionsende gezählt. Die Bestellmenge bestimmt, wie viel Zeit benötigt wird, normalerweise 7 bis 15 Tage.

 

 

5. Wird TKB DMF an den Kunden senden?

Ja, TKB Mold sendet DFM-Analysen (Design for Manufacturing) und sogar Mold-Flow-Analysen vor Beginn des Formenbaus zur Überprüfung/Genehmigung durch den Kunden.

 

 

6. Wird TKB den Formentwurf zur Genehmigung einsenden?

Nach der Genehmigung durch DMF sendet TKB das Formdesign zur Genehmigung und TKB beginnt nicht mit dem Stahlschneiden, bevor der Kunde die schriftliche Genehmigung des Formdesigns erhalten hat.

 

 

7. Wie viele Plastikproben werden kostenlos zur Verfügung gestellt?

TKB würde normalerweise 10 bis 20 Schüsse für die ersten Probeaufnahmen mit Tor (falls vorhanden) kostenlos je nach Größe der Teile zur Verfügung stellen, die Abholung wäre Frachtkosten.

 

 

8. Welche Seite bietet Kunstharz für Spritzgussversuche?

TKB kann Kunststoffharz liefern, bei Bedarf kann der Kunde dasselbe Kunststoffharz bereitstellen.

 

 

9. Wie kann man sich vor dem Versand von der Qualität überzeugen?

Der Versand kann nur nach bestandener TKB QC-Inspektion, bestandener QC-Inspektion des Kunden oder bestandener Inspektion durch Dritte arrangiert werden, und TKB wird immer da sein, um volle Unterstützung zu leisten.

 

 

10. Wie wird TKB alle Werkzeugdaten protokollieren?

TKB führt Aufzeichnungen über alle endgültig genehmigten 2D-, 3D-Formzeichnungen und Änderungsdokumente und sendet sie zur Datei an den Kunden, um zukünftige Verwirrung zu vermeiden, falls technische Änderungen erforderlich sind.

Describes how the automotive industry uses large plastic molds with inserts to reduce costs and increase efficiencylatest blogs
mehr sehen
large plastic molds Company

Von Emma 2023-3-8

Large plastic molds are molds used in the manufacturing process of producing large plastic parts or products. These molds can be made of steel, aluminum, or other metals and are designed to withstand ...
Preis für Spritzgussformen

Von Emma 2022-6-16

Was ist Spritzgießen?Spritzgießen ist eine der primären Methoden zur Herstellung von Kunststoffwaren.Nicht irgendein Kunststoffprodukt – der Prozess beinhaltet meistens die Herstellungvon Massenteilen von i...
Hersteller von Kunststoffspritzgussformen

Von Emma 2022-6-25

Spritzgießen ist ein Verfahren zum Einspritzen von erhitztem und geschmolzenem Kunststoffmaterial in eine Form und anschließendem Abkühlen und Erstarren, um ein geformtes Produkt zu erhalten.Dieses Verfahren eignet sich für die Massenproduktion von P...
Advantages of using insert type large plastic molds in various industrial applications.

Von Emma 2023-2-25

Insert type large plastic molds offer several advantages in various industrial applications, including: Cost-effectiveness: The use of insert type molds can reduce the overall cost of production, as o...
TPR Overmolding Mold: Der Schlüssel zur Herstellung von Soft-Touch-Produkten

Von Emma 2023-2-27

Das Umspritzen von thermoplastischen Elastomeren (TPE), auch bekannt als TPR-Umspritzung, wird immer beliebter für die Herstellung von Produkten mit weicher Haptik.TPR-Umspritzungsformen werden verwendet, um eine Reihe von Weicht...
Spritzgussformen kosten wie

Von Emma 2022-9-1

Spritzgussformen kosten wie ist ein Unternehmen, das hochwertige Spritzgussformen herstellt.Wir sind bestrebt, unseren Kunden den bestmöglichen Service und die bestmöglichen Produkte zu bieten.Wir verpflichten uns zu Qualität und...
plastic injection molding parts

Von Emma 2022-9-20

When it comes to plastic injection molding, it's important to select the best parts for your needs. There are a variety of factors to consider, including the type of plastic, the dimensions of the par...
Spritzguss

Von Emma 2022-6-22

Was ist Kunststoff-Spritzguss?Dies ist ein Herstellungsverfahren, das zur Herstellung von Artikeln in großen industriellen Mengen verwendet wird.Es wird in Massenproduktionsprozessen verwendet, bei denen ein Artikel Tausende und ...
Großer Hersteller von Kunststoffformen

Von Emma 2022-6-8

Eine Kunststoffform ist ein Werkzeug, das mit Kunststoffformmaschinen in der kunststoffverarbeitenden Industrie abgestimmt ist, um Kunststoffprodukten eine vollständige Konfiguration und eine präzise Größe zu...
OEM-Spritzgussform

Von Emma 2022-7-1

Die Spritzgussform ist ein Werkzeug zur Herstellung von Kunststoffprodukten, es ist auch ein Werkzeug, um Kunststoffprodukten eine vollständige Struktur und genaue Abmessungen zu verleihen.Das Spritzgießen ist ein Verarbeitungsverfahren, das in der M...
Describes how the automotive industry uses large plastic molds with inserts to reduce costs and increase efficiencyServices
Sekundäre Verarbeitung

Von Emma 2021-8-14

TKB Weiterverarbeitung Unter Weiterverarbeitung versteht man in der Regel den zweiten oder nachfolgenden Verarbeitungsschritt eines Kunststoff-Spritzgussteil...
Prototyp entwickeln

Von Emma 2021-8-14

Prototyping Ein Prototyp wird in der Regel für neu entwickelte oder entworfene Produkte benötigt.Prototyp ist der erste Schritt, um die Machbarkeit von Pr...
Fallstudie

Von Emma 2021-8-13

FALLSTUDIE TKB FALLSTUDIE FÜR GROSSE INDUSTRIEN TKB Mold China spezialisiert sich auf die Herstellung von Kunststoffspritzgussformen und Spritzgussdienstleistungen für...
One-Stop-Service

Von Emma 2021-7-26

SERVICE AUS EINER HAND One-Stop-Service von der Herstellung von Spritzgussformen bis zum Formen von Kunststoffteilen TBK Mold China ist ein Qualitätsprodukt auf höchstem Niveau ...
Formendesign

Von Emma 2021-8-18

MOLD DESIGN Das professionellste und kreativste Designteam WARUM TKB MOLD DESIGN WÄHLEN Glauben Sie, wie das Sprichwort sagt, gut begonnen ist halb getan?...
Herstellung von Spritzgussformen

Von Emma 2021-8-17

Herstellung von Spritzgussformen Professioneller und zuverlässiger Formenhersteller, formen Sie gemeinsam für eine bessere Welt!
Kunststoff-Spritzguss

Von Emma 2021-8-15

Kunststoffspritzguss Zuverlässiger Dienstleister für Kunststoffspritzguss Formen Sie gemeinsam für eine bessere Welt WARUM TKB P...
Kontakt